PRC Mechanical Engineering Board Exam Results (October 2008)
The Professional Regulation Commission (PRC) on Thursday announced that 1,132 out of 2,006 or 56.43% of the examinees passed the Mechanical Engineer Licensure Examinations given by the Board of Mechanical Engineering earlier this month.
Check out list of successful examinees (TXT file)
The examinations were for mechanical engineers and certified plant mechanics. The results of the examinations were released in one working day after the examinations, the PRC said.
The oathtaking ceremonies will be held before the board in Manila on Thursday, November 20 at 1PM at the Fiesta Pavillion, Manila Hotel; board passers in Cebu on Tuesday, November 25, at 4PM at the Grand Majestic Convention Center; and board passers in Davao on Saturday, November 29, 6PM at the Grand Men Seng Hotel.
Related Entries:
PRC Pharmacy Board Exam Results January 2009
PRC Chemical Engineering Board Exam results November 2009
PRC Chemical Engineering Board Exam Results (November 2008)
PRC Architecture Board Exam Results January 2010
PRC Electronics Engineering Board Exam Results (October 2008)
PRC Nursing Board Exam Results November 2008
PRC Social Work Board Exam Results June 2009
PRC Midwifery Board Exam Result 2008
PRC Electrical Engineering Board Exam Results September 2009
PRC Civil Engineering Board Exam Result November 2009
October 17th, 2008 at 10:48 pm
pa cheese burger naman kau….
October 18th, 2008 at 4:02 am
56.43% lang?! ang dami namang b.o.bo.! tapos yung mga pumasa, daming nagmemorize ng leakage! walang kwenta na kurso!
October 18th, 2008 at 1:50 pm
multiple choice na nga lang yan mababa parin? pero d ako bilib sa PRC ngayon kasi they dont make exams liek they used to. dati full blown problem solving ang exams ngayon multiple choice lng.
October 18th, 2008 at 2:18 pm
subukan niyong kumuha… hehehe for our time yung math 85 out of 100 is problem solving with power plant and design problems pa…
kaya di ako bilib sa mga taga maynila kasi may leakage pala kayo… sa visayas at mindanao di uso yun…
October 18th, 2008 at 3:20 pm
very resourceful ang review centers
October 19th, 2008 at 2:17 pm
bakit hindi binanggit dito yung mga topnotchers?! walang kwenta baka mababa rin scores nila baka 76 lang ang highest, tapos mga iba 75 pasang awa! mga bumagsak talagang mahina at 68 lang score nila nakakahiya
October 19th, 2008 at 7:51 pm
sino b ung nag sabi na walang kwenta ung course na mechanical….pare di mo alam pinag daanan namin…kaya wag kng umasta na parang magaling ka!!! bka pag ikaw nag exam ma ihi k sa nerbyos!
October 19th, 2008 at 9:30 pm
ang yabang naman ng taong to (rta)… kung gusto mo mag petition ka nalang sa PRC na ibalik yung dating full blown problem solving ang exams. Well that’s gonna be okay for me na soon to take the board exam. And I’ll show you what I’ve got.
October 19th, 2008 at 9:39 pm
Sinong nagsabi na walang kwenta ang Mechanical Eng’g na coarse… Brad di kami nagpapakahirap mag-aral ng minimum of 5 years para ganyanin mo lang. Got it? This generation would be a mess without a skill and expertise of a mechanical engineer. Please realize that.
October 20th, 2008 at 10:18 am
to RTA yabang mo…hehehe pasensya 85/100 ang problems mathematics. score ko 88 den topnotcher ako sa board… kaw???? anong top mo???? ano ba score mo dati?
October 20th, 2008 at 10:20 am
ano ba yung course mo at school rta???
October 20th, 2008 at 6:51 pm
you don’t have the slightest right to say that rta…-kht n ikaw p ang pnkmagaling n tao sa mundo!!
naah..basta i want to congratulate my kua jimmy and lord^^,
hail to both of you!!
October 20th, 2008 at 8:42 pm
yehee.. want to greet my brother PAUL JOSEPH SANCHEZ FERRIOL he passed the board exam.. and sa lhat din ng mga tiga plm na nkapasa ahahaah..
gudluck sa career nio..
October 20th, 2008 at 11:30 pm
hoy!!! RTA ybng mo ha, kw kya magtake ng ME exam tgnan ntin anu mkuha mo score. cgro bitter ka bmagsak ka dti. hahahaha. ndi nga nmn kmi ngaral para gnyanin mu. CGRADO AQ BOBO KA KC, KYA IINGGIT K SMIN!!!! TAMA AQ DBA?! HAHAHA
October 21st, 2008 at 3:59 pm
congrats sa lahat ng nakapasa………..at sa hindi nakapasa,wag kayong mawalan ng pag asa……………………
October 21st, 2008 at 4:00 pm
MSU-IIT…………………………….D BEST
October 21st, 2008 at 5:27 pm
papansin lng yan c rta!!!! hahahahaha
October 22nd, 2008 at 9:43 am
Congratz sa CMU-Bukidnon.. no.1 sa OCT2008 Board exam.. d BEST…
October 24th, 2008 at 10:04 am
Basta ako msaya kasi galing sa skul namin ang nagTop 1 sa buong Pilipinas.. hehe.. kaya yung mga nagsasabi na madali na lang ang ME Board ngayon.. akala nyo lang yun! Congratulations sa lahat! *^__^*
Eto po list ng top 10 passers ng Mechanical Engineering Board Exam 2008:
1. Bhryan Phillip Rollon Ondoy, Polytechnic University of the Philippines-Taguig – 91.95%
2. Winston Bercades Gomez, Negros Oriental State University (CVPC)-Dumaguete City – 90.70%
Marvin Velasco Mayo University of the East-Caloocan – 90.70%
Eugene Bigno Tatoy Cebu State College of Science & Technology-Cuenco – 90.70%
3. John Paul Ponce Ganaden Saint Louis University – 90.40%
4. Renante Galban Calago, Andres Bonifacio College – 89.95%
Lordinio Cultura Espino, Bataan Peninsula State College-Balanga (Bataan Poly. Sc) – 89.95%
5. Joe Carlo Enoc Bacon, University of Southern Mindanao-Kidapawan – 89.65%
Jimmy Guinto Tallada Bataan Peninsula State College-Balanga (Bataan Poly. Sc) – 89.65%
6. Randy Diaz Dellosa, Bicol University-Legazpi — 89.45%
Benigno Yebes Pascual, Tarlac State University (Tarlac College of Tech.) – 89.45%
7. Jephunneh Andilab Paalisbo, Negros Oriental State University (CVPC)-Dumaguete – 89.05%
8. Jake Codorniz Mesias, Bicol University-Legazpi – 89.00%
9. Alvin Bautista Cempron, Mindanao Polytechnic State College (DMMMPSC) – 88.95%
10. Edward Cunanan Dela Mines, Polytechnic University of the Philippines-Main-Sta. Mesa – 88.90%
October 24th, 2008 at 2:19 pm
# Talangkang Pinoy Says:
October 18th, 2008 at 4:02 am
56.43% lang?! ang dami namang b.o.bo.! tapos yung mga pumasa, daming nagmemorize ng leakage! walang kwenta na kurso!
hoy pare aus ka mag salita kala mu kung cnu kang mgaling…
kung ikaw cguro ung ngtake ng exam mlamang bumagsak ka…
hindi un dahil sa leakage no…
ako buhay na saksi pati yan c tallada kung gano kahirap ung exam…
mahirap kc sa inyo puro kau dada…
ang yabang mu KARMAHIN ka SANA F.U….
October 24th, 2008 at 2:22 pm
hoy Talangkang Pinoy
hoy pare aus ka mag salita kala mu kung cnu kang mgaling…
kung ikaw cguro ung ngtake ng exam mlamang bumagsak ka…
hindi un dahil sa leakage no…
ako buhay na saksi pati yan c tallada kung gano kahirap ung exam…
mahirap kc sa inyo puro kau dada…
ang yabang mu KARMAHIN ka SANA F.U….
at wag mung masabi sabing walang kwenta ung MECHANICAL ENGINEERING….
cguro ilang taon bago ka nkagraduate no…
ang tigas ng mukha mu…
baliw!!!
October 24th, 2008 at 2:24 pm
hoy Talangkang Pinoy
hoy pare aus ka mag salita kala mu kung cnu kang mgaling…
kung ikaw cguro ung ngtake ng exam mlamang bumagsak ka…
hindi un dahil sa leakage no…
ako buhay na saksi pati yan c tallada kung gano kahirap ung exam…
mahirap kc sa inyo puro kau dada…
ang yabang mu KARMAHIN ka SANA F.U….
at wag mung masabi sabing walang kwenta ung MECHANICAL ENGINEERING….
cguro ilang taon bago ka nkagraduate no…
ang tigas ng mukha mu…
baliw!!!
October 24th, 2008 at 5:17 pm
rta <<< sawa na sa buhay.. gusto ng pumanaw.. siguro isa k sa mga bumagsak..
tanggap lng dude..
October 24th, 2008 at 5:20 pm
Talangkang Pinoy << dude bawal iyakin dito.. tahan na.. tanggap lng.. ungas..
October 24th, 2008 at 10:58 pm
galing galing! top 1 sa school na naman namin galing…hehe…congrats sa mga pumasa..100% ng examinees samin pasado…wooot…
October 27th, 2008 at 10:43 am
para kay ‘rta’ pti kay talangkang pinoy…
mga ungas kau gusto nyo n yata pumanaw!!!
mgaq wlang mgawa sa buhay…
inom kau ng LASON…
October 27th, 2008 at 10:44 am
para kay ‘rta’ pti kay talangkang pinoy…
mga ungas kau gusto nyo n yata pumanaw!!!
mga wlang mgawa sa buhay…
inom kau ng LASON…
October 28th, 2008 at 10:27 pm
just wanna say congratulations to my fellow norsunians who made it to the top!!bow ko ninyo bai!
November 5th, 2008 at 1:36 pm
TOP 1 AT TOP 10 ang PUP???
naks galing naman… nu ba yan ang talino talaga…hehehe
quality education with affordable price nga talaga…di tulad ng iba…
go PUP! keep up the good work…
tsaka balita ko may Pupian din daw TOP 9 sa Accountancy ah…
wala namang bago e… di na nakakagulat un.. galing talaga PUP…
congrats to all board passers…. to God be the glory….
November 7th, 2008 at 3:17 pm
wa lagey MSU IIT natop.. T.T
pero okay lang! aja!
congrats sa lahat!
November 12th, 2008 at 1:26 pm
baluga si rt ewN…panget!!
November 12th, 2008 at 3:34 pm
mangtas jud au ka nan….congratz daw gikan ni chinggay,,,heheheheeheh proud au sa ato skul…ug sa ato lugar nga dipolog city
November 17th, 2008 at 2:19 pm
to rta and Talangkang Pinoy: wag kaung magmagaling, wag nyo alispustahin ang course na ME at ang licensure namin, malamang bobo yan, o di kaya mga frustrated ME’s yan, wag nyo pansinin. Kahit multiple choice ang exam ng ME, hindi ibig sabihin ay hindi mahirap, we can’t just select any letter para sa sagot, hindi rin pwedeng guessing game lang. Kung sakali mang ibalik ang full blown problem solving, walang problema sa mga ME.
to those who passed and Top the Exam.. Congratulations for a job well done
November 17th, 2008 at 4:56 pm
kinsa my nag-ingon nga la kwenta nga korz?bai suwayi dw take sa exam kng dli ba ka makuyapan? just try to ask lexmark and san miguel kung pila ang bidding sa ako.dha nmo ma’prov kng la ba jud kwenta ME…
November 22nd, 2008 at 8:50 pm
magagaling ang mechanical engineering
………baka kau ang walang kwenta
…..go PSME
November 26th, 2008 at 11:35 am
next year SURIGAO EDUCATION CENTER wil be top 1!!! abangan nyo october 2009!!!!!! tandaan nyo!!!!
November 29th, 2008 at 8:42 pm
The multiple choice type of exam for ME was introduced and enacted in 1995 when the PSME was under the leadership of the late Mr. Antonio Ro Herrera to give an ease for those examinees who had been flunking the full blown problem type of examinations.
I am not against the existing one but truly medyo may tsamba nga ngayon compared sa dati…
December 5th, 2008 at 2:38 pm
Ei galing naman ng mga taga pup, mapa-main man o taguig isang pamilya tayo.
Naks! Di lang sa ME humahataw, pati din sa Accountancy at sobra sa ECE dami nagtop.
Galing talaga ng mga isko at iska :)
December 5th, 2008 at 2:42 pm
tsaka i-share ko lang ha.
sa computation need mo talaga mag-compute dahil lapit lapit ang choices.
sa elements, lalo na sa machine design, pagka-hirap hirap yung mga tipong ngayon mo lang masasalubong yung term na yun.
di biro ang mag-review at patience talaga ang need sa preparation for board.
Kaya ang masasabi ko lang dun sa mga nagsasabi madali ang ME, sige ok lang pero pag nagka-anak kayo at kumuha yan ng kurso namin sige lang imposible di kayo makarinig ng “Ma/Pa ang hirap talaga” :)
December 5th, 2008 at 5:34 pm
Ei..guys…kahit d q nakpasa CONgRATS sa mga nakapsa sa ALCORCON ….ANG GALING NIO PO>…
January 20th, 2009 at 11:27 am
Guys, good job! mechanical engineering of PUP-T
Galing…Dyn ako galing..Alcorcon Review Center batch 2006!
kahit na bumabaha ng ihi sa CR, kc walang pundo para ipagawa..
kahit na puro lamok sa loob ng classroom, kahit na mga mukhang adik
mga classmyt (hehe..joke), kahit misan walang baon papasok sa iskul,
kahit hindi kumain ng tanghalian..masagutan lang mga problem buong book ni Virgil
Moring Fairs, PJ Potter, at Thermodynamics ni Sta. Maria. Kahit mamayat na
at memorisin ang pagka daming daming number sa steam table..hehe, at ikumpara
ang equation na Ein=Eout o Ein=Eout +Elosses, kung alin ang tama sa dalawa.
hehe..kahit mabaliw na..whahaha
Ganyan kaming mga Mechanical Engineering ng PUP-T.
Wala sa pagkasikat ng skul nyo yan o sa facilities ng skul..
wala sa pera o yaman ng isang tao para lang makapasa ka sa board exam ng Mechanical engineering!
At higit sa lahat wala sa talino yan!
NASA PAG TYATYAGA AT DETEMENINASYUN MO YAN PARA PUMASA!
“Hindi lahat ng matatalino ay pumapasa sa board exam”
Kaya sa Bumubuo ng mga mechanical engineers ng PUP-T
MALIGAYANG PAGBATI SA INYUNG TAGUMPAY!
Hope to see you d2 sa company na pinagtratrabahuhan ko.
Enjoy nyo pagiging engineer nyo!!!!!!
January 22nd, 2009 at 2:22 pm
Hi! We are in need of Mechanical Engineers for Technical Staff post. We are looking for ME with experience in preventive maintenance program.
Interested and qualified candidates may send their resume to pinnacleasia@yahoo.com. You may call 703.66.62 for inquiries and interview schedule.
Thanks,
Katherine B. Maranan
Technical Recruitment Associate
PinnacleAsia Outsourcing Company
January 22nd, 2009 at 5:00 pm
o..ayan mga kapwa ko mechanical engineers, may nag post na sa inyo ng trabaho..
salamat po ma’am kath!!!
Dagdag kaalaman lang din… because of economic crisis, lahat po ng company ngayun ay affected, like electronics and automotive company, EPCM and others..
ako po ay nasa EPCM company. Totoo ang mga naririnig nating balita..tama medyo mahina po talaga ngayun.. medyo nagbabawasan ng mga staff..
kaya payong kapatid lang mga kapatid. wag masyadong mataas pride natin sa paghanap ng trabaho.. wag nyo muna intindihin ang sweldo, ganyan talaga sa simula mga engineers, ako nga dati nung nag start ako..10k lang offer sakin, trabaho ko nun drafter. but anyway.. ngayun ko lang nalaman na tayo palang mga engineers, habang nagkaka experience, tumataas ang value..pati sweldo. hehe.. kaya sa lahat ng nag aaply.. wag nyong tingnan ang sweldo, experience tingnan nyo, and beside..karamihan sa mga successful engineers ngayun dumaan sa ganyang sistima. Gudluck mga bro. for your job hunting.. Mis ko na PUP-T.
January 30th, 2009 at 5:00 pm
To all mechanical engineering students—– After graduation in college, don’t plan of looking a job but try to think of what kind of business you will put up with….gets ba?
February 26th, 2009 at 12:42 pm
HOY TALANGKANG PINOY! GRADUATE KB? ANO NATAPOS MO?
March 3rd, 2009 at 5:31 pm
Congrats sa mga taga PUP. Balita ko 100% pasado ang mga taga PUP Taguig! Go go go! Pupian din ako!
March 9th, 2009 at 7:35 pm
i just want to congratulate JONARD REYES SUYO for a job well done!!! more blessings to come
March 14th, 2009 at 2:14 pm
Congratulations po sa mga LOUISIANS na pumasa sa board lalo na kay kuya JOHN PAUL GANADEN….hehe…Goodluck sa paghanap ng work po…gogogo louisians…
April 4th, 2009 at 11:18 am
To my fellow Passers last board exam, Congrats Guys..”Hardwork was paid”.di kasi nila alam kung gaano kahirap ang course natin.
April 6th, 2009 at 8:26 pm
wenks… asa nmn un… pinakamahirap kya mechanical… kesa nmn s ibang course… kahit saan nyo tgnan pinaka mahirap ang mechanical…
April 20th, 2009 at 2:13 pm
ayos din mag comment si talangkang pinoy,,UTAK TALANGKA nga,, inggit ka lng tsong, di ka kasi lisensyado, baka nga di kpa nakapagtapos o nakapag aral man lng,wahahahaha,, ME rules tsong,,
April 20th, 2009 at 2:16 pm
Talangkang Pinoy Says:
October 18th, 2008 at 4:02 am
56.43% lang?! ang dami namang b.o.bo.! tapos yung mga pumasa, daming nagmemorize ng leakage! walang kwenta na kurso!
hoy utak talangka, kaya nga may prc to regulate the board passers,palibhasa kasi wala kang utak,kng meron man utak talangka
April 21st, 2009 at 11:33 pm
hoi mga t@nga kala nyo ba madali ang mechanical engineering board exam palibsa dali dali lang ng kurso nyo alang dating amfota kau hindi bastabasta ang mech eng`g pinakamahirap na kurso ata ito sa engineering!!!!!!!!!!!!!!!
April 27th, 2009 at 10:37 am
oist talangka!!!pti kw rta!! kau nga!!! wg nga kau sali d2!!! pang engrs lang ‘to!! cguro course nyo bs barbershop!!! mtaas b passing rate nyo?? haha d pde barbero d2!!! matitindi 0ct 2008 batch!!! kabisado namen steam table!!! nga pla sn n kya c ronnie pti c naval????
April 27th, 2009 at 10:44 am
oist kaung 2 ul8!!! (talangka pti rta), bka d nyu alam kht multiple choice ung exam namen, A-Z ang choices!!! plibhasa pg barbershop licensure A&B lang ung choices e!!! Ay ang t@t@ng@ ng mga ‘to!!!
June 30th, 2009 at 8:35 pm
ay grabe. BSA ako pero ME po boyfriend ko. grabe mukhang mahirap nga talaga. pero para sa mga nakapasa, CONGRATS! sana matulad sa inyo yung mga next in line. haha. well goodluck sa career. sana despite economic crisis maging ok pa din kaio. God Speed:)
July 25th, 2009 at 12:33 pm
mga tsong hindi biro ang pagrereview hahaist enge naman tips pano kayo nakapasa, nagrereview din ako ngaun ,malapit na examination hahai nako po kinakabahan nako. guys TIPS naman.THANKS
July 25th, 2009 at 12:36 pm
ung mga bumabatikos saming mga M.E. nako poh hindi nyo lang aqlam kung gano kahirap magprepare, wala na nga akong time magAHIT ng VULVUL ko eh napapanot na din aKO SA KABABASA mahirap talaga tong pinagdadaanan namin at napagdaanan na din ng iba.
August 2nd, 2009 at 9:29 pm
Ok guys TIPS ko sa mga mag board exam!
1. read PSME code!
2. para sa machine design subject! gamitin nyo ung Faires at Moth na book!
3. pray hard it works!
wala pa ako subject na power plant eh!
September 7th, 2009 at 7:10 pm
magmemorize ng mdaming elements!
ska mag inum! hehe
and lastly wg kakabahan sa exam ska prayer pala!
gudluck!
September 23rd, 2009 at 2:39 pm
Hmmmm..to Rta and talangka..be smooth in blowing words againts ME ha…
To both of you, you’re not in great authority to discriminate ME in a way like placing
garbage in our head…ME is one of the most difficult engineering courses mark that
Low-understanding people…hmmmm..To PSME hit the mark for the total Global
transformation in the field on engineering..I am proud to be a ME student..
September 25th, 2009 at 11:11 pm
Congrats sa mga nakapasa at good luck sa mga mageexam ngaung October…!!!
Ei, tanong ko lang po kasi yung friend ko mageexam sa ME dis Oct, hindi niya alam kung ano ang scope ng exams, self-review lang kasi siya. Ano po ba ang subjects na scheduled for day 1 and day 2?
Thanks soo much! Your replies will be highly appreciated…
November 13th, 2009 at 10:56 am
ei, guyz,,,,,
Im proud 2 be ME,,,
hirap tlga board exam…..Buti nkya ntin yun….
GOGOGOGOGOGO……………Polytecnic University of the Philippines!!!!!
CONGRATULATIONS s lhat ng PASSER!!!!
GUDLAK s CAREER ntin!!!
tnx nga pla kina mam.Cynthia,kay inday,kay masungit,jong,eng’r.Alcorcon,eng’r.Naval…
S mga nging Prof. nmin s PUP-CAVITE….
Pti s mga nging frends nmin s review center….
(MIT,PUP-T,PUP-M,BSU,BICOL,etc…..)
M.E. D’BEST!!!!!!!
November 13th, 2009 at 10:59 am
DON’T BE ANGRY TO RTA & TALANGKA,,,
ENGINEER N TYO,WG NG MGPKBABA….
ENJOY LNG TYO S TITLE NTIN GUYS!!!!
CONGRATS ULI!!!!!
November 13th, 2009 at 11:09 am
Kumuha ako ng exam nung Oct 1987. Review Center ko doon sa Manila, limot ko na pero yung owner/teacher eh tawag namin “buloy”. Mga bisaya sila.
Mahirap ang exam dati. 3 days yun. I got 91.70% pero wala pa rin sa top ten. Balita ko nasa top 20 raw.
Masaya na rin ako kung saan ako dinala ng pagka ME ko. Dahil sa trabaho napadpad na ako sa USA.
Graduate ako sa FEU. Noong panahon puro na lang demonstrations so walang pasok. Medyo disappointed nga ako dahil doon pero nag-aral din talaga ako ng kusa.
Masaya ang buhay ng ME. I am proud of my BSME.
Good luck sa inyong lahat.
November 30th, 2009 at 9:50 am
Talangkang Pinoy, kung wala ang ME, paano ka kaya mabubuhay ngayon?
December 3rd, 2009 at 9:24 am
HI attention to all Mechanical Engineer graduate with PRC board paser, we ineed for Newly Graduate of ME willing to work in Laguna Area the position is urgent you may call 7064311 look for ghe and submit to us your updated resume at pinnacleasia@yahoo.com
Thanks and Best Regards,
Gerald Paul Orbe
Recruitment Specialist
PinnacleAsia Outsourcing Company
February 4th, 2010 at 10:22 am
hindi naman sa maraming b.o.b.o. depende din yata yan sa qouta. minsan kahit bagsak pumapasa. hinahatak nila yung grade pataas para makuha nila yung qouta. na kelanganag pumasa.. saka business din yan.. kung me binagsak sila. more or less mag aaply ulit yun so bagong bayad na naman at dagdag kita yun sa prc kung ala babagsak. anung sense ng papasa..